EUDR Guide
  1. Home
  2. Enforcement
  3. EUDR at Customs

Enforcement

EUDR at Customs: The DDS Reference in the Customs Declaration and Release Checks

EUDR customs from 30 December 2026: the DDS reference or declaration identifier before release (Article 26(4)), TARIC codes C716 and C717, condition B090.

Last updated 15 November 2026 · By the EUDR Guide Editorial Team · How we fact-check · Print this page

Summary

From 30 December 2026, the person lodging a customs declaration for the release for free circulation or export of a relevant product makes the reference number of the due diligence statement, or the declaration identifier for micro or small primary operators, available to customs authorities before release

(Article 26(4) of Regulation (EU) 2023/1115 as amended). Which TARIC code carries it, and what can customs do next?

Customs enforce the EU Deforestation Regulation at the border. Article 26 applies from 30 December 2026 (Article 38(2)), and no further delay is proposed as of 14 November 2026.

The rules below cover the reference, the codes, the release sequence and Articles 27 and 28.

  • Rule: reference or declaration identifier before release or export (Article 26(4)).
  • Codes: C716, C717, condition B090.
  • Application: 30 December 2026; 30 June 2027 for operators that are natural persons or micro or small undertakings established as such by 31 December 2024, products in the Annex to Regulation (EU) No 995/2010 from 30 December 2026 (Article 38(2) and (3)).
  • Interface: 1 December 2029 (Article 28(1)).

What Do EUDR Customs Controls Cover Under Article 26?

EUDR customs controls cover two customs procedures only: release for free circulation and export (Article 26(1)). The EUDR scope decides which products are relevant.

Release for Free Circulation and Export: The Article 2 Definitions

Release for free circulation and export are customs procedures, and Article 2(36) to (39) define what enters and leaves the market. The last column follows Guidance C/2026/3896, chapter 1(b) and (c), and FAQ Version 5 (April 2026), 5.5.

Term Article Meaning (summary of the consolidated text, 18 September 2026) Not covered
Customs authorities 2(33) the customs authorities of Article 5(1) of Regulation (EU) No 952/2013 See Article 2(33)
Release for free circulation 2(36) the procedure of Article 201 of Regulation (EU) No 952/2013 customs warehousing, inward processing, temporary admission, transit
Export 2(37) the procedure of Article 269 of Regulation (EU) No 952/2013 outward processing, end-use, ship or aircraft supplies, internal transit, temporary exit, re-export (Article 270)
Products entering the market 2(38) from third countries, released for free circulation, intended for the Union market, not for private use or consumption See Article 2(38)
Products leaving the market 2(39) placed under the export procedure See Article 2(39)

Every Article 2 term is set out under EUDR definitions.

Competent Authorities and Customs Authorities: Who Does What

Competent authorities carry the overall enforcement, and customs authorities carry the controls on declarations (Article 26(2) and (3)). Competent authorities identify checks on a risk-based approach under Article 16. Customs control declarations under Articles 46 and 48 of Regulation (EU) No 952/2013, primarily on risk analysis.

Which Due Diligence Statement Reference Goes Into the Customs Declaration Under Article 26(4)?

The statement reference number, or the declaration identifier for micro or small primary operators, must be available to customs before release or export (Article 26(4), as replaced by Regulation (EU) 2025/2650). Each due diligence statement receives a reference number in the EUDR Information System (Article 33(2)(b)).

Who Makes the Reference Available: Operators, Declarants and Customs Representatives

The person lodging the customs declaration makes the reference available, except where the statement is made available through the Article 28(2) interface (Article 26(4)).

The Commission considers that this is generally the importer in data element 13 04 000 000 (Guidance C/2026/3896, chapter 2(a)). Operator status follows the tests under EUDR operators, not the act of lodging.

Timing: Obtain the Reference Number Before Lodging

The statement is submitted and its reference number obtained before the customs declaration is lodged (FAQ 5.20). After the number is given to customs, the statement can no longer be amended or withdrawn (Implementing Regulation (EU) 2024/3084, Article 5(3)(c)).

A grouped number replaces individual numbers (Article 8a(3) of that Implementing Regulation); the reference number and declaration identifier have their own page.

Export by a Downstream Operator: No Reference, Codes Y196 and Y188

Article 26(4) "shall not apply to the export of a relevant product by a downstream operator". The TARIC data provide Y196 (non-SME downstream operator, registered) and Y188 (SME downstream operator, not registered), both export only. See downstream operators under the EUDR.

EUDR TARIC Codes: Document Codes, Measures 776 and 777 and Condition B090

The Commission's TARIC data (Revision 1, 23 September 2026) create measure 776 for import and measure 777 for export, with the codes below. Import is declared with the 10-digit TARIC code and export with the 8-digit CN code (FAQ 2.9).

Code Meaning Used at Who declares it
C716 due diligence statement presented (Article 3) import and export declarant, who declares possession of the statement
C717 declaration identifier of the simplified declaration of micro or small primary operators, or made available for them by Member States (Article 4a) import and export declarant, for a micro or small primary operator
C718 export or re-import of a product placed on the EU market in the transitional period before the entry into application (Article 1(2)) export and re-import declarant
C720 re-import, reference of the upstream operator (Article 5(3)(a)) re-import only non-SME downstream operator (registered)
C725 re-import, reference of the upstream operator (Article 5(3)(a)) re-import only SME downstream operator (not registered)
Y129 goods not concerned although classified under an affected "ex" code import and export declarant
Y132 produced before 29 June 2023 (Article 1(2)) import and export declarant
Y133 used, second-hand, waste and recovered products import and export declarant
Y141 operators that are natural persons or micro or small undertakings established as such by 31 December 2024 (Article 38(3)); products in the Annex to Regulation (EU) No 995/2010 excepted; declarable only until 29 June 2027 import and export the operators described
Y142 non-commercial activity, consumer-to-consumer consignment import and export declarant
Y187 samples and goods for tests (Annex I, note (5)(a) and (b)) import and export declarant
Y190 packing material where Annex I says so; integrated only for 4401, 4405, 4415, 4416 and 48 import and export declarant
Y191 inputs for medicinal products, correspondence and information materials import and export declarant
Y188 export by an SME downstream operator (not registered) export only SME downstream operator (not registered)
Y196 export by a non-SME downstream operator (registered) export only non-SME downstream operator (registered)

DG TAXUD TARIC document Ares(2024)6896255, Revision 1 of 23 September 2026; checked 14 November 2026.

C716 for the Statement, C717 for Micro or Small Primary Operators

C716 is the TARIC document code for a due diligence statement presented (Article 3); the declarant declares that the statement exists, and the German BLE explains that it is given in addition to the reference number. C717 is the declaration identifier of the one-time simplified declaration of micro or small primary operators (Article 4a(2)).

Y-Codes: Out-of-Scope Goods and Exemptions

A Y-code states why a statement reference is not needed for the goods declared. The eight codes mean:

  • Y129: used only for "ex" lines.
  • Y132: produced before 29 June 2023.
  • Y133: used or recovered goods.
  • Y142: consumer-to-consumer consignment.
  • Y187: samples and tests.
  • Y190: packing.
  • Y191: medicinal inputs and correspondence.
  • Y141: Article 38(3) operators.

Y141 is declarable only until 29 June 2027, for operators that are natural persons or micro or small undertakings established as such by 31 December 2024 (Article 38(3)); products in the Annex to Regulation (EU) No 995/2010 are excepted. See EUDR exemptions.

Re-Import Codes C718, C720 and C725 and Transitional Stock

C718 covers export or re-import of a product placed on the EU market in the transitional period (Article 1(2)). C720 and C725 are re-import only and carry the reference of the upstream operator (Article 5(3)(a)). The situations are set out in FAQ 9.2 and under EUDR transitional stock.

Condition B090: When Release Is Not Allowed

Condition B090 applies where a statement or simplified declaration is required, none is presented and no exemption applies; the import or export is then "not allowed after control" (action 09). All other conditions carry action 29, "allowed after control".

How the Measures Look in TARIC for Annex I Lines

As of 14 November 2026, the EU TARIC database shows measures 776 and 777 for all third countries, valid from 30 December 2026; none is valid on 14 November 2026. Conditions differ by line: wood heading 4401 adds Y129 and Y190, and export lines swap C720 and C725 for Y188 and Y196.

Example line Measure Valid from Conditions offered
0901 11 00 00 import 776 2026-12-30 C716, Y132, Y133, Y141, Y142, C717, C718, Y187, C720, C725, B090
0901 11 00 00 export 777 2026-12-30 C716, Y132, Y133, Y141, Y142, C717, C718, Y187, Y188, Y196, B090
4401 11 00 00 import 776 2026-12-30 as the coffee import line, plus Y129 and Y190

EU TARIC database, simulation date 30 December 2026, checked 14 November 2026. The database writes B090 as B90.

Every line is listed under EUDR Annex I.

What Happens After Lodging: Status Check, Suspension, Release or Refusal?

Release after lodging runs in two phases, split by the electronic interface of Article 28(1) (Article 26(5)).

Until the Interface Exists: Cooperation Instead of Status Checks

Until the interface is in place, Article 26(6) to (9) do not apply, and customs exchange information and cooperate with competent authorities under Article 27, taking that into account on release where necessary (Article 26(5)(a)).

After the Interface: Suspension and Checks Under Articles 17 and 26(7)

Once the interface is in place, Article 26(6) to (9) apply through it (Article 26(5)(b)), in four steps:

  1. Status check (Article 26(6)): customs examine the status of the statement.
  2. Suspension (Article 26(7)): customs suspend where the product is identified under Article 17(2) for a check.
  3. Release (Article 26(8)(a) to (c)): no flag, suspension not maintained, or lifted.
  4. Refusal (Article 26(9)): the competent authorities find non-compliance.

A suspension ends within three working days, or 72 hours for perishable products, and can be extended by further periods of three working days (Article 17(3)); see EUDR checks.

Is Release Proof of Compliance?

No: release for free circulation or export is not deemed proof of compliance with Union law, in particular with the Regulation (Article 26(10)).

Article 27: How Customs and Competent Authorities Share Information

Article 27 requires the Commission, competent authorities and customs authorities to cooperate closely and exchange information (Article 27(1)), in accordance with Article 47(2) of Regulation (EU) No 952/2013 (Article 27(2)).

Customs may pass confidential information to the competent authority of the Member State where the operator, downstream operator, trader or authorised representative is established (Article 27(3), as amended by Regulation (EU) 2025/2650). Risk-related information is also exchanged between customs, the Commission and competent authorities (Article 27(5)).

Article 28: The Single Window Interface and Its Timeline to 1 December 2029

The electronic interface between national customs systems and the EUDR Information System must be in place by 1 December 2029 (Article 28(1), as replaced by Regulation (EU) 2025/2650); the original date was 30 June 2028. It sits in the EUDR timeline with every other date.

The interface builds on Regulation (EU) 2022/2399, and the Commission names EU CSW-CERTEX as the connecting component (FAQ 7.1). Article 28(2) adds a national single window route, and Article 28(3) requires implementing acts on data and format.

National Customs Administrations: EUDR in Belgium, France, the Netherlands, Spain and Germany

The codes are EU-wide and national pages repeat them; where a page shows other dates, Article 38 governs. The table is as of 14 November 2026.

Member State Source What it says on customs
EUDR in Belgium AGD&A, EUDR page checks the reference or identifier at release and withholds release if the competent authority maintains the suspension; code notice of 8 October 2026
EUDR in France DGDDI, procedure page C716, C717 and the Y exemption codes go in the declaration; the reference is obtained before release or export
EUDR in the Netherlands Douane, EUDR page enforcement partner of the NVWA; codes listed as provisional; the page shows superseded dates
EUDR in Spain MITECO, competent authorities page customs may suspend or refuse release or export
EUDR in Germany BLE, customs declaration page explains C716 as given in addition to the reference number

Every rule on this page is checked against the consolidated text of Regulation (EU) 2023/1115 and the TARIC data of the European Commission; see how EUDR Guide verifies every fact. Placement on EUDR Guide is never sold.

This guide explains the rules; it is not legal advice for an individual case.

How Do Customs Controls Fit Into Enforcement, Checks and Penalties?

Customs is the border step of enforcement, while checks and penalties sit with the competent authorities (Article 26(2)). The parent page is EUDR enforcement.

Customs Refusal and Penalties

Refusal of release is a customs measure (Article 26(9)); fines are national (Article 25). The maximum for legal persons must be at least 4 % of total annual Union-wide turnover (Article 25(2)(a)), see EUDR penalties.

Where Customs Meets the Due Diligence Statement and the Information System

Customs authorities have access to the EUDR Information System (Article 33(4)), which is interconnected with customs through the EU Single Window (Article 33(2)(f)). Statements are filed in the EUDR Information System.

EUDR at Customs FAQ

Six customs questions follow. Others are in the EUDR FAQ.

Is C716 a CN or HS Code?

No: C716 is a TARIC document code in the documents part of the declaration; the product is classified by its CN or TARIC code (Annex I).

Does a Customs Broker Become the Operator?

No: a broker that only lodges the declaration does not place, make available or export, so it is no operator (Guidance, chapter 2(a); FAQ 2.10, 3.15). The operator keeps its responsibility (Articles 4(3) and 6(1)); see operator, downstream operator or trader.

Do Goods Moved From Great Britain to Northern Ireland Need a Reference?

Yes for business-to-business movements: UK guidance asks for the reference number or declaration identifier on the IMMI or customs declaration (Defra, updated 27 August 2026). Movements from Northern Ireland to Great Britain carry no EUDR requirements; see where the EUDR applies.

What If the Information System Is Down When Goods Must Clear?

Contingency arrangements apply: Implementing Regulation (EU) 2024/3084, Article 15a, inserted by Implementing Regulation (EU) 2026/1565, provides them when the system is unavailable without planning for more than 60 minutes.

Do I Need Software to Declare the EUDR Codes?

No: the only mandatory IT is the free EUDR Information System (Implementing Regulation (EU) 2024/3084, Article 18(1)), and the codes are declared in the normal customs declaration. What platforms do is covered under EUDR software; none is mandatory.

Does a FLEGT Licence Replace the Reference at Customs?

No: a FLEGT licence proves legality only (Article 10(3)), so the statement and its reference are still required. What FLEGT licences prove is set out there.

Sources